Call 1-800-525-3303

Fiber Optic Cables and Accessories

OM1 62.5/125, OM2 50/125, OM3 50/125 and 9/125 Singlemode - simplex and duplex patch cords as well as pre-terminated multistrand. Choose jacket, length, and connector and we'll build the cable you need.

  • Available in any Length!
  • Order Online for Free UPS Ground Shipping.
  • Made in USA.

We manufacture many fiber optic cable products that are not yet available for online purchase. If you don't see the fiber optic cable product you need, please call 800-525-3303 or e-mail us for assistance.

 

TECH TIP...

 

Buying Fiber Optic Patch Cords

 

 1. Singlemode, Multimode, or Mode Conditioning

Note: Mode is a single electromagnetic field pattern that travels in fiber.
Singlemode is an optical fiber with a small core (2-9 microns) that supports one mode. The core/cladding size (e.g. 8.3/125) is stamped on the cable jacket, which is traditionally yellow. Singlemode is commonly used for high speed, long distance links.
Multimode is an optical fiber with a core (25-200 microns) that supports several modes. The core/cladding size, commonly 62.5/125 or 50/125, is stamped on the cable jacket which is traditionally orange. Check equipment requirements or cable jacket to determine which core/cladding size you need. Multimode is used for lower speed, short distance links.
Mode Conditioning is specific to Gigabit Ethernet applications. It eliminates multiple signals caused by differential mode delay effects, which would otherwise limit the cable distance lengths.

Singlemode, multimode, or mode conditioning cables are not interchangeable; if unsure check equipment requirements.

 

2. Simplex, Duplex, or Multistrand
Simplex cable has a single fiber.
Duplex cable has two fibers usually in zipcord (side by side) style.
Multistrand cable has two or more fibers in a round jacket.

3. Connectors
Commonly used connectors are ST, SC, LC, MT-RJ, FC, ESCON, and FDDI (MIC). Others are available.

4. Jacket
Available jacket types are OFNR (PVC) Riser, OFNP Plenum, Indoor/Outdoor Riser, Indoor/Outdoor Plenum, Aerial (Self-supporting), and Direct Burial. Plenum requirements are determined by local fire codes. Short runs within a single room usually use a general purpose OFNR rated jacket. Longer runs through air ducts, and other air handling spaces usually require a plenum rated jacket. Outdoor, aerial, and direct burial construction may be required when running cable through various outdoor environments.

5. Pulling Eye Option
A pulling eye is an "easy pull" ring that is attached to the end of the cable to prevent damage during installation. During installation the pulling force is redirected to the body of the cable instead of the core or connectors. This reduces the stress, and therefore damage, to the fibers. The pulling eye may be removed and reused.